1. Silva JV; Teixeira, JCF; Teixeira, SFC; Preziati, S; Cassiano, J (2017) “CFD Modeling of Combustion in Biomass Furnace”, Energy Procedia, 120, pp 665–670
2. Adelaide Cerveira, Elisabete Correia, Nuno Cristelo, Tiago Miranda, Fernando Castro, Ana Fernandez-Jiménez – Statistical analysis of the influence of several factor on compressive strength of alkali activated fly ash, Procedia Structural Integrity, 5, 2017, pp. 1116-1122
3. Aguiar SS, Veloso MI, Fernando AL, Franco R (2017) Control of Milk Allergenicity, Journal of Dairy & Veterinary Sciences, 2 (5), 1-6. DOI: 10.19080/JDVS.2017.02.555600.
4. Benites, A.J., Fernandes, M., Boleto, A.R., Azevedo, S., Silva, S., Leitão, A.L. (2017) Occurrence of ochratoxin A in roasted coffee samples commercialized in Portugal. Food Control 73: 1223-1228; http://dx.doi.org/10.1016/j.foodcont.2016.10.037
5. Bento D, Pereira AI, Lima J, Miranda JM, Lima R, (2017), Cell-free layer measurements of in vitro blood flow in a microfluidic network: an automatic and manual approach, Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 1-9. (in press). https://doi.org/10.1080/21681163.2017.1329029
6. Bento, D., Sousa, L., Yaginuma, T., Lima R., Miranda JM, (2017) Microbubble moving in blood flow in microchannels: effect on the cell-free layer and cell local concentration, Biomedical Microdevices 19: 6. https://doi.org/10.1007/s10544-016-0138-z
7. Bezerra. K.; Machado, J.; Carvalho, V.; Castro, M.; Costa, P.; Matos, D.; Soares, F. (2017) “Bath-Ambience – a Mechatronic System for Assisting the Caregivers of Bedridden People”, Sensors 2017, 17(5), 1156; doi:10.3390/s17051156.
8. Canadas N., Machado J., Meireles J., Delgado P., Portinha A., “Development of an automatic system for the measurement of force and stroke parameters of car radio keypads”, Measurement 100, 84-92, 2017.
9. Canadas, N.; Machado, J.; Soares, F.; Barros, C.; Varela, L.; (2017) “Simulation of Cyber Physical Systems Behavior Using Timed Plant Models”. Mechatronics. DOI: https://doi.org/10.1016/j.mechatronics.2017.10.009
10. Cârlescu, V.; Olaru, D.; Prisacaru G.; Oprisan C.; Machado, J. (2017) “Sensors and Actuators on Determining Parameters for Being Considered in Selection of Elastomers for Biomimetic Hands”, Sensors 17(6), 1190; doi:10.3390/s17061190.
11. Castro, F. – O Setor da Fundição e a Economia Circular, Fundição, outubro 2017, pp. 20-22.
12. Cunha, Â., Veiga, J., Silva, L. F., Seabra, E., “Analysis and Comparison of a Hydraulic and Pneumatic System Using The Dymola Software”, International Journal of Mechatronics and Applied Mechanics, 2017, Issue 1, pp. 230-237.
13. d’Água RB, Branquinho R, Duarte MP, Maurício E, Fernando AL, Martins R, Fortunato E. (2017). Efficient coverage of ZnO nanoparticles on cotton fibres for antibacterial finishing using a rapid and low cost in situ synthesis. New Journal of Chemistry. doi:10.1039/C7NJ03418K
14. Fernando AL, Aguiar SS, Veloso MI, Franco R (2017) Control of Milk Allergenicity, Journal of Dairy & Veterinary Sciences, 2 (5), 1-6.
15. Fernando AL, Costa J, Barbosa B, Monti A, Rettenmaier N (2017) Environmental impact assessment of perennial crops cultivation on marginal soils in the Mediterranean Region, Biomass & Bioenergy, https://doi.org/10.1016/j.biombioe.2017.04.005, in press
16. Ferraz, A.; Brito, J.; Carvalho, V. Machado, J. (2017) “Blood Type Classification Using Computer Vision and Machine Learning”, Neural Computing and Applications (2017) 28:2029–2040 Doi: 10.1007/s00521-015-2151-1
17. Ferraz, A.; Carvalho, V.; Machado, J. (2017) “Determination of Human Blood Typing Using Image Processing Techniques”, Measurement, Vol. 97, February 2017, Pages 165–173.
18. Ferreira, A. C., Nunes, M. L., Teixeira, J. C. F., Martins, L. A. S. B., Teixeira, S. F. C. F., & Nebra, S. A. (2017). Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach. Applied Thermal Engineering, 123, 646–657.
19. Ferreira, S.; Monteiro, E.; Brito, P.; Vilarinho, C - Biomass resources in Portugal: Current status and prospects; Renewable and Sustainable Energy Reviews Vol 78, October 2017, pages 1221-1235. DOI 10.1016/j.rser.2017.03.140
20. Ferreira-Guedes S., Leitão, A.L. (2017) Simultaneous removal of dihydroxybenzenes and toxicity reduction by Penicillium chrysogenum var. halophenolicum under saline conditions. Ecotoxicology and Environmental Safety 150: 240-250; doi: 10.1016/j.ecoenv.2017.12.046
21. Filipe Almeida, Nuno Cristelo, Tiago Miranda, Castorina S Vieira, Maria de Lurdes Lopes, Fernando Castro - Alkali-Activated Fly Ashes: Influence of Curing Conditions on Mechanical Strength, U. Porto Journal of Engineering, 3:2, 2017, pp. 57-67.
22. Florian, H.; Mocanu, A.; Vlasin, C.; Machado, J.; Carvalho, V.; Soares, F.; Astilean, A.; Avram, C. (2017) “Deaf People Feeling Music Rhythm by Using a Sensing and Actuating Device”. Sensors and Actuators A: Physical. DOI:10.1016/j.sna.2017.10.034
23. Gonçalves, M., “Protecting fruits with propolis”, PanEuropean Networks: Science and Technology Series, Issue 25, December 2017, pp. 284-285, ISSN 2049-2391 (Print), ISSN 2049-2405 (Online)
24. H. M. Silva; C. D. Carvalho; N. R. Peixinho, Elasto-Plastic Behavior of Aluminum Foams Subjected to Compression Loading, International Applied Mechanics, May 2017, Volume 53, Issue 3, pp 356–360. http://doi.org/10.1016/j.applthermaleng.2017.05.127
25. João Gomes-Fonseca, João L. Vilaça, Tiago Henriques-Coelho, Bruno Direito-Santos, António C.M. Pinho, Jaime C. Fonseca, Jorge Correia-Pinto, “A new methodology for assessment of pectus excavatum correction after bar removal in Nuss procedure: Preliminary study”, Journal of Pediatric Surgery, July 2017, Volume 52, Issue 7, Pages 1089–1097
26. Kunz, G.; Machado, J.; Perondi, E. (2017) “Using timed automata for modeling, simulating and verifying networked systems controller’s specifications”, Neural Computing and Applications, 28(5), 1031-1041 doi: 10.1007/s00521-015-2115-5
27. Kunz, G.; Machado, J.; Perondi, E.; Viyatkin, V. (2017) “A Formal Methodology for Accomplishing IEC 61850 Real-Time Communication Requirements” IEEE Transactions on Industrial Electronics. Vol. 64, N. 8, August, 2017. DOI: 10.1109/TIE.2017.2682042
28. Leitão A.L., Costa M.C., Enguita F.J. (2017) Applications of genome editing by programmable nucleases to the metabolic engineering of secondary metabolites. Journal of Biotechnology 241: 50-60; http://dx.doi.org/10.1016/j.jbiotec.2016.11.009.
29. Machado, J.; Galvão, J.; Fernandes, A. (2017) “Formal Verification Considering a Systematic Modelling Approach for Function Blocks”. Journal of the Brazilian Society of Mechanical Sciences and Engineering. https://doi.org/10.1007/s40430-017-0893-7
30. Manupati V. K.; Gokula Krishnan M.; Varela M.L.R.; Machado J. (2017) “Telefacturing based distributed manufacturing environment for optimal manufacturing service by enhancing the interoperability in the hubs” Journal of Engineering Vol. 2017, Article ID 9305989, 15 pages https://doi.org/10.1155/2017/9305989 (indexado na WoS-Emerging Sources Citation Index) (H Index: 36; SJR: 0.74)
31. Maurício E, Rosado C. Duarte MP, Veríssimo J, Bom S, Vasconcelos L (2017) Efficiency of Nisin as Preservative in Cosmetics and Topical Products. Cosmetics, 4(4), 41; doi:10.3390/cosmetics4040041.
32. Mello-Sampayo C, Agripino A, Stilwell D, Vidal B, Fernando AL, Silva-Lima BS, Vaz MF, Canhão H, Marques C (2017) Chronic hyperglycemia modulates rat osteoporotic cortical-bone microarchitecture into less fragile structures, International Journal of Endocrinology, Volume 2017, Article ID 4603247, 9 pages, https://doi.org/10.1155/2017/4603247.
33. Oliveira, M.; Azenha, M.; Lourenço, P.; Meneghini, A.; Guimarães, E.; Castro, F.; Soares, D. - Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar, Construction and Building Materials, 148, 2017, pp. 38-48
34. Papazoglou EG, Fernando AL (2017) Preliminary studies on the growth, tolerance and phytoremediation ability of sugarbeet (Beta vulgaris L.) grown on heavy metal contaminated soil, Industrial Crops and Products, 107, 463-471. https://doi.org/10.1016/j.indcrop.2017.06.051.
35. Pinho, D., Campo-Deano L., Lima R., Pinho F.T., (2017), In vitro particulate analogue fluids for experimental studies of rheological and hemorheological behavior of glucose-rich RBCs suspensions, Biomicrofluidics 11 (5), 054105. http://aip.scitation.org/doi/10.1063/1.4998190
36. Puga H., Carneiro V. H., Correia P., Vieira V., Barbosa J., Meireles J.. “Mechanical behavior of honeycomb lattices manufactured by investment casting for scaffolding applications" Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol.231, pp. 73-81, 2017. DOI: 10.1177/1464420716665414.
37. Ribeiro, C.; Sepúlveda, D.; Carvalho, J., Vilarinho, C., Cristino, J.; Loureiro, I. - Guimarães Circular Economy: towards a sustainable city, European Journal of Sustainable Development (2017), 6, 3, 69-74. ISSN: 2239-5938 DOI: 10.14207/ejsd.2017.v6n3p69
38. Ricardo Correia, Margarida Gonçalves, Catarina Nobre, Benilde Mendes (2017) Impact of torrefaction and low-temperature carbonization on the properties of biomass wastes from Arundo donax L. and Phoenix canariensis, Bioresource Technology, 223: 210-218, doi: 10.1016/j.biortech.2016.10.046. Epub 2016 Oct 18.
39. Silva H. M., Meireles J.F., “Experimental validation of a novel thin-walled beam prototype”, journal Mechanics and Mechanical Engineering, 2017.
40. Silva H. M., Meireles J.F., “Feasibility of Internally Reinforced Thin-walled Beams for Industrial Applications”, journal Mechanics and Mechanical Engineering, 2017.
41. Silva H. M., Meireles J.F., “Structural Optimisation of internally reinforced beams subjected to uncoupled and coupled bending and torsion loadings for industrial applications", journal Mechanics and Mechanical Engineering, 2017.
42. Silva H. M., Meireles J.F., “Structural Optimization Coupled with Materials Selection for Stiffness Improvement”, journal Mechanics and Mechanical Engineering, 2017.
43. Silva H. M., Meireles J.F., ”Comparative Effectiveness of the mechanical behavior of sandwich beams under uncoupled bending and torsion loadings-Accepted for publication in the journal “Mechanics and Mechanical Engineering” , 2017.
44. Silva H.M., Costa M.J., Meireles J.F., “Motivation in Mechanics of Materials Classes: An experimental approach” International Journal of Mechanical Engineering Education, 2017. DOI: 10.1177/0306419017708643].
45. Silveira, A. S., Senra, P. A., Seabra, E., Silva, L. F., “Development of an Easy and Effective Attachment System for Lower Limb Prosthesis”, International Journal of Mechatronics and Applied Mechanics, 2017, Issue 1, pp. 238-242.
46. Sousa, J., Figueiredo, L., Machado, J., Mendonca, J.P., Measuring the punching profile of a punch and bind machine (2018) Lecture Notes in Mechanical Engineering, (201519), pp. 727-732. DOI: 10.1007/978-3-319-68619-6_70
47. Souza VGL, Fernando AL, Pires JRA, Rodrigues PF, Lopes AAS, Braz-Fernandes FM (2017) Physical properties of chitosan films incorporated with natural antioxidants, Industrial Crops and Products, 107, 565-572. https://doi.org/10.1016/j.indcrop.2017.04.056.
48. Varela M.R.L, Trojanowska J., Carmo-Silva S., Costa N.M.L., Machado J. (2017) “Comparative simulation study of production scheduling in the hybrid and the parallel flow”. Management and Production Engineering Review, Vol.8, No.2, July 2017, pp.69-80, DOI:10.1515/mper-2017-0019.
49. Vieira, J., Osório, J.M.A., Mouta, S., Delgado, P., Portinha, A., Meireles, J.F. & Santos, J., “Kansei engineering as a tool for the design of in-vehicle rubber keypads”, Applied Ergonomics, 61. 1-11, 2017.
50. Wang YF, Jankauskiene Z, Qiu CS, Gruzdeviene E, Long SH, Alexopoulou E, Guo Y, Szopa J, Hao DM, Fernando AL, Wang H (2017) Fiber Flax Breeding in China and Europe, Journal of Natural Fibers, 1-16, http://dx.doi.org/10.1080/15440478.2017.1325431, in press
1. Araújo, A., Kapisch, L., Varela, M.L.R., Machado, J. Information organization and production planning improvement in a clothes company in Portugal (2016) Romanian Review Precision Mechanics, Optics and Mechatronics, 2016 (49), pp. 44-47.
2. Barbosa, FV; Afonso, JL; Rodrigues, FB and Teixeira, JCF (2016) Development of a solar concentrator with tracking system; Mech. Sci., 7, 233–245; doi:10.5194/ms-7-233-2016
3. Bezerra, K., Machado, J., Leão, C.P., Soares, F., Carvalho, V., Matos, D. Requirements for the development of medical devices - Caregivers perspectives survey (2016) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2, DOI: 10.1115/IMECE201667002
4. Bezerra, K., Carvalho, V., Matos, D., Machado, J., Soares, F., Ferraz, A. A faster and more secure human blood type determining product-concept design (2016) Journal of Medical Devices, Transactions of the ASME, 10 (4), art. no. 044510. DOI: 10.1115/1.4033877
5. Brito, F. P.; Alves, A.;Pires, J. M.;Martins, L. B.;Martins, J.;Oliveira, J.;Teixeira, J.;Goncalves, L. M.;Hall, M. J.; (2016); Analysis of a Temperature-Controlled Exhaust Thermoelectric Generator During a Driving Cycle, Journal of Electronic Materials, 45(3), 1846-1870, Springer, 2016, DOI: 10.1007/s11664-015-4258-7, http://link.springer.com/article/10.1007%2Fs11664-015-4258-7
6. Brito, F. P.; Figueiredo, L.; Rocha, L. A.; Cruz, A. P.; Goncalves, L. M.; Martins, J.;Hall, M. J.; (2016); Analysis of the Effect of Module Thickness Reduction on Thermoelectric Generator Output, Journal of Electronic Materials, 45(3), 1711-1729, Springer, 2016, DOI: 10.1007/s11664-015-4182-x, http://link.springer.com/article/10.1007/s11664-015-4182-x
7. Brito, FP; Fillon, M; Miranda, AS; Analysis of the Effect of Grooves in Single and Twin Axial Groove Journal Bearings under Varying Load Direction, Tribology International, Elsevier, 103 (2016) 609–619; http://www.sciencedirect.com/science/article/pii/S0301679X16302572
8. Bruno, S., José, M., Filomena, S., Vítor, C., Demétrio, M., Karolina, B. The conceptual design of a mechatronic system to handle bedridden elderly individuals (2016) Sensors (Switzerland), 16 (5), art. no. 725, DOI: 10.3390/s16050725
9. Calejo, Joana; Pinho, Diana;Galindo-Rosales, Francisco J.; Lima, Rui; Campo-Deano, Laura; (2016); Particulate Blood Analogues Reproducing the Erythrocytes Cell-Free Layer in a Microfluidic Device Containing a Hyperbolic Contraction, Micromachines 7 (1), 4.
10. Carneiro, VH; Capela, P; Teixeira, JC; Teixeira, S; Cerqueira, F; Macedo, F; Ribas, L; Soares, D (2016) Influence of Copper layer content in the elastic and damping behavior of Glass-fiber/Epoxy-Resin composites, Applied Composite Materials, Volume 23, Issue 6, pp 1219–1228; DOI: 10.1007/s10443-016-9510-7.
11. Carneiro V.; Puga H.; Meireles J.; (2016); “Analysis of the geometrical dependence of auxetic behavior in reentrant structures by finite elements”, Acta Mechanica Sinica, Vol. 32, pp. 295-300.
12. Correia R, Gonçalves M, Nobre C, Mendes B (2017) Impact of torrefaction and low-temperature carbonization on the properties of biomass wastes from Arundo donax L. and Phoenix canariensis, Bioresource Technology, 223, 210-218, http://dx.doi.org/10.1016/j.biortech.2016.10.046
13. Costa, T.; Nickerson, M.; Littera, D.; Martins, J.; Shkolnic, A.; Shkolnic, N.; Brito, F., "Measurement and Prediction of Heat Transfer Losses on the XMv3 Rotary Engine", SAE Int. J. Engines 9(4):2016, DOI:10.4271/2016-32-0033.
14. Costa, S; Mendonça, JP; Peixinho, N; Study on the impact behaviour of a new safety toe cap model made of ultra-high-strength steels, Materials & Design, Volume 91, 5 February 2016, Pages 143–154, 2016.
15. Cunha, A; Martins, J; Rodrigues, N; Monteiro, V; Afonso, JL; Ferreira, P e Brito, F "Using Vanadium Redox Flow Batteries for the Electricity Storage towards the Electric Vehicles Fast Charging Process", Energy 115, part 2, pp 1478-1494, 2016 DOI: 10.1016/j.energy.2016.02.118
16. Dourado M., Meireles J.; (2016); Obtenção de um modelo de elementos finitos simplificado para representação de juntas rebitadas em análise dinâmica de estruturas usando uma ferramenta de updating, Rev. int. métodos numér. cálc. diseño ing. 2016; 32(3):173–180.
17. Enguita F.J., Costa M.C., Fusco-Almeida A.M., Mendes-Giannini M.J., Leitão A.L. (2016) Transcriptomic Crosstalk between Fungal Invasive Pathogens and Their Host Cells: Opportunities and Challenges for Next-Generation Sequencing Methods. Journal of Fungi 2(1): 7; doi:10.3390/jof2010007
18. Faustino, Vera;Catarino, Susana O.;Lima, Rui;Minas, Graca; (2016); Biomedical microfluidic devices by using low-cost fabrication techniques: A review, Journal of biomechanics, 49 (11), 2280-2292. DOI:10.1016/j.jbiomech.2015.11.031
19. Ferraz, A., Carvalho, V., Machado, J., Brito, J. Mechatronic system for performing blood pre-transfusion tests (2016) Sensors and Actuators, A: Physical, 246, pp. 81-90. DOI: 10.1016/j.sna.2016.05.022
20. Ferreira, ACM; Teixeira, SFCF; Silva, RG & Silva, AM (2016): Thermal-economic optimisation of a CHP gas turbine system by applying a fit-problem genetic algorithm, International Journal of Sustainable Energy, DOI: 10.1080/14786451.2016.1270285
21. Ferreira, A. C., Nunes, M. L., Teixeira, J. C. F., Martins, L. A. S. B., & Teixeira, S. F. C. F. (2016). Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes. Energy, 111, 1–17. DOI: 10.1016/j.energy.2016.05.091
22. Gonçalves, T.M.M., Machado, J.M., Esteves, J.S. Aero-stabilizer workbenches for the teaching of PID control (2016) Romanian Review Precision Mechanics, Optics and Mechatronics, 2016 (49), pp. 10-14.
23. Kapisch, L., Araújo, A., Varela, M.L.R., Machado, J. Purchase management improvement in a TV company from the industry district of Manaus (PIM) (2016) Romanian Review Precision Mechanics, Optics and Mechatronics, 2016 (49), pp. 48-51.
24. Lau, CS; Khor, CY; Soares, D; Teixeira, JC; Abdullah, MZ (2016) Thermo-mechanical Challenges of Reflowed Lead-free Solder Joints in Surface Mount Components: A review, Soldering & Surface Mount Technology, Vol. 28 Iss: 2, pp.41 – 62. http://dx.doi.org/10.1108/SSMT-10-2015-0032.
25. Leitão A.L., Enguita F.J. (2016) Gibberellins in Penicillium strains: Challenges for endophyte-plant host interactions under salinity stress. Microbiological Research, 183: 8-18; doi:10.1016/j.micres.2015.11.004
26. Leitão A.L., Enguita F.J. (2016) Secondary Metabolism: An Unlimited Foundation for Synthetic Biology. Frontiers in Microbiology, 6: 1562; dx.doi.org/10.3389/fmicb.2015.01562
27. Lopes, O., Martins, T., Carvalho, V., Matos, D., Soares, F., Machado, J. Ergonomics and usability in the development of a portable virtual gaming device applied in physiotherapy (2016) Transactions of Famena, 40 (4), pp. 95-106. DOI: 10.21278/TOF.40408
28. Medeiros, R. S.; Araújo, L. M.; Queiroga Neto, V.; Andrade, P. P.; Melo, M. A.; Gonçalves, M. M. B. P. (2016) Identification of lactic acid bacteria isolated from artisanal Coalho cheese produced in the Brazilian Northeast, C y TA Journal of Food, 14 (3): 613-620, doi:10.1080/19476337.2016.1185468
29. Munoz-Sanchez, B. N.;Silva, S. F.;Pinho, D.;Vega, E. J.;Lima, R.; (2016); Generation of micro-sized PDMS particles by a flow focusing technique for biomicrofluidics applications, Biomicrofluidics 10 (1), 014122. DOI: 10.1063/1.4943007
30. Pereira, F., Carvalho, V., Soares, F., Machado, J., Bezerra, K., Silva, R., Matos, D. Development of a Medical Care Terminal for Efficient Monitoring of Bedridden Subjects (2016) Journal of Engineering, 2016, art. no. 3591059, DOI: 10.1155/2016/3591059
31. Pinho, Diana; Rodrigues, Raquel O.;Faustino, Vera;Yaginuma, Tomoko; Exposto, Jose; Lima, Rui; (2016); Red blood cells radial dispersion in blood flowing through microchannels: The role of temperature, Journal of biomechanics, 49 (11), 2293-2298. DOI: 10.1016/j.jbiomech.2015.11.037
32. Pinto E, Faustino V, Pinho D, Rodrigues RO, Lima RA, Pereira AI; (2016); Cell-free layer analysis in a polydimethysiloxane microchannel: a global approach, International Journal of Medical Engineering and Informatics 8 (3), 196-209.
33. Reis, L., Varela, M.L.R., Machado, J.M., Trojanowska, J. Application of lean approaches and techniques in an automotive company (2016) Romanian Review Precision Mechanics, Optics and Mechatronics, 2016 (50), pp. 112-118.
34. Remédios M., Carvalho F.A., Enguita F.J., Cardoso C., Martins I.C., Santos N.C., Leitão A.L. (2016) Effects of Penicillium chrysogenum var. halophenolicum on kraft lignin: color stabilization and cytotoxicity evaluation. 3 Biotech 6: 1-10; doi: 10.1007/s13205-016-0414-x
35. Rodrigues, N., Ferreira, A. Teixeira, S., Soares, D., Teixeira, J., Cerqueira, F., & Macedo, F. (2016). Contact angle measurement of SAC 305 solder: numerical & experimental approach. Journal of Materials Science: Materials in Electronics. 10.1007/s10854-016-4924-4
36. Rodrigues, Raquel O.; Banobre-Lopez, Manuel; Gallo, Juan; Tavares, Pedro B.; Silva, Adrian M. T.;Lima, Rui; Gomes, Helder T.; (2016); Haemocompatibility of iron oxide nanoparticles synthesized for theranostic applications: a high-sensitivity microfluidic tool, Journal of Nanoparticle Research, 18 (7), 1-17. DOI: 10.1007/s11051-016-3498-7
37. Rodrigues, Raquel O.; Lopes, Raquel; Pinho, Diana; Pereira, Ana I.; Garcia, Valdemar; Gassmann, Stefan; Sousa, Patricia C.; Lima, Rui; (2016); In Vitro Blood Flow and Cell-Free Layer in Hyperbolic Microchannels: Visualizations and Measurements, BioChip Journal, 10, 9-15.
38. Rodrigues, Raquel O.; Pinho, Diana; Bento, David;Lima, Rui;Ribeiro, Joao; (2016); Wall expansion assessment of an intracranial aneurysm model by a 3D Digital Image Correlation System, Measurement 88, 262-270.
39. Sánchez, C., Vasilenko, P., Santos, M., Duarte, M.P., Loebler, M., Cruz, A.S., Gonçalves, M. (2016) Potential Application of Portuguese Propolis to Control Blue Mold Disease in ‘Rocha’ Pear. Acta Horticulturae, 1144, 359-364. (DOI: 10.17660/ActaHortic.2016.1144.53).
40. Sepúlveda, D., Loureiro, I., Vilarinho C. and Carvalho, J.M. (2016) Municipal waste map: a case study of Guimaraes, Portugal. European Journal of Sustainable Development (2016), 5, 4, 77-90. DOI: 10.14207/ ejsd.2016.v5n4p77
41. Soares C, Fernando AL, Alvarenga N, Martins APL (2016) Substitution of sodium chloride by potassium chloride in São João cheese of Pico Island, Dairy Science & Technology, 96 (5), 637-655, doi:10.1007/s13594-016-0293-2.
42. Souza, VGL, Fernando AL (2016) Nanoparticles in food packaging: Biodegradability and potential migration to food—A review, Food Packaging and Shelf Life, 8, 63-70, http://dx.doi.org/10.1016/j.fpsl.2016.04.001
43. Taboada, B.;Monteiro, F. C.;Lima, R.; (2016); Automatic tracking and deformation measurements of red blood cells flowing through a microchannel with a microstenosis: the keyhole model, Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 4, 229-237, Taylor & Francis.
44. Vieira, G.G., Varela, M.L.R., Putnik, G.D., Machado, J.M., Trojanowska, J. Integrated platform for real-time control and production and productivity monitoring and analysis (2016) Romanian Review Precision Mechanics, Optics and Mechatronics, 2016 (50), pp. 119-127.
45. Wang YF, Jankauskiene Z, Qiu CS, Gruzdeviene E, Long SH, Alexopoulou E, Guo Y, Szopa J, Hao DM, Fernando AL, Wang H (2017) Fiber Flax Breeding in China and Europe, Journal of Natural Fibers, http://dx.doi.org/10.1080/15440478.2017.1325431, in press.
1. Almeida, J. D., Ferreira, M. J., Lobarinhas, P. A., Silva, L. F., Leite, A., Araújo, A., Sousa, F., "PROJECT, DEVELOPMENT AND TEST OF AN ARTIFICIAL MULTIFUNCTIONAL FOOT", Journal of Thermal Engineering, Yildiz Technical University Press, Istanbul, Turkey, Vol. 1, No. 1, pp. 31-34, January, 2015.
2. Alves, J., Peixinho, N., Da Silva, M.T., Flores, P., Lankarani, H.M., A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solids,(2015) Mechanism and Machine Theory, 85, pp. 172-188. DOI: 10.1016/j.mechmachtheory.2014.11.020
3. Araújo, Â.R.G., Peixinho, N., Pinho, A.C.M., Claro, J.C.P., Quasi-static and dynamic properties of the intervertebral disc: Experimental study and model parameter determination for the porcine lumbar motion segment, (2015) Acta of Bioengineering and Biomechanics, 17 (4), pp. 59-66. DOI: 10.5277/ABB-00153-2014-04
4. R. G. Araújo, N. Peixinho, A. Pinho, and J. C. P. Claro, The intradiscal failure pressure on porcine lumbar intervertebral discs: an experimental approach, Journal Mechanical Sciences (MS): Mech. Sci., 6, 255-263, 2015
5. Barbosa B, Boléo S, Sidella S, Costa J, Duarte MP, Mendes B, Cosentino SL, Fernando AL (2015) Grass Production of Heavy Metal-Contaminated Soils Using the Perennial Energy Crops Miscanthus spp. and Arundo donax L. BioEnergy Research, 8(4), pp 1500-1511. (doi:10.1007/s12155-015-9688-9).
6. Barbosa B, Costa J, Fernando AL, Papazoglou EG (2015) Wastewater reuse for fiber crops cultivation as a strategy to mitigate desertification, Industrial Crops and Products 68, 17–23, available on line (DOI: 10.1016/j.indcrop.2014.07.007)
7. Barbosa B, Boléo S, Sidella S, Costa J, Duarte MP, Mendes B, Cosentino SL, Fernando AL (2015) Phytoremediation of Heavy Metal-Contaminated Soils Using the Perennial Energy Crops Miscanthus spp. and Arundo donax L., BioEnergy Research, 8, 1500-1511,available on line (DOI: 10.1007/s12155-015-9688-9).
8. Bento D., Lima R., Miranda J. M., “Computation of a Three-Dimensional Flow in a Square Microchannel: A Comparison Between a Particle Method and a Finite Volume Method”, Micro and Nanosystems 7 (3), 142-147, 2015.
9. F.P. Brito A. Alves, J.M. Pires, L.B. Martins, J. Martins, L.M. Gonçalves, J. Oliveira, J. Teixeira, M. Hall; Analysis of a Temperature Controlled Exhaust Thermoelectric Generator during a Driving Cycle; Published online first in Journal of Electronic Materials, Springer, 2015, DOI: 10.1007/s11664-015-4258-7; http://link.springer.com/article/10.1007%2Fs11664-015-4258-7
10. Brito, F.P., Martins, J., Hançer, E., Antunes, N., Gonçalves, L.M., "Thermoelectric Exhaust Heat Recovery with Heat Pipe-based Thermal Control", Journal of Electronic Materials (JEMS), Springer, Vol.44, No.6, pp1984-1997, 2015; ISSN 0361-5235; DOI: 10.1007/s11664-015-3638-3; http://link.springer.com/article/10.1007%2Fs11664-015-3638-3; http://download.springer.com/static/pdf/858/art%253A10.1007%252Fs11664-015-3638-3.pdf?auth66=1424089376_56bfcbfda22c2e83eaffc2c10d38de9c&ext=.pdf
11. Brito,F.P., Figueiredo,L., Rocha,L.A., Cruz,A.P., Gonçalves,L.M., Martins, and Hall,M., " Analysis of the Effect of Module Thickness Reduction on Thermoelectric Generator Output", Journal of Electronic Materials (JEMS), Springer, "online first", 2015; DOI: 10.1007/s11664-015-4182-x; http://link.springer.com/article/10.1007/s11664-015-4182-x?wt_mc=internal.event.1.SEM.ArticleAuthorOnlineFirst
12. Brito, F.P., Martins, J., Hançer, E., Antunes, N., Gonçalves, L.M.; "Thermoelectric Exhaust Heat Recovery with Heat Pipe-based Thermal Control", Journal of Electronic Materials (JEMS), Springer, Vol.44, No.6, pp1984-1997, 2015; ISSN 0361-5235; DOI: 10.1007/s11664-015-3638-3
13. V.H. Carneiro, J. Meireles. Hydraulic Hose as an Instability Reducer for a Flexible Shaft Composed by Universal Joints. Mechanism and Machine Science – Vol.24 New Trends in Mechanism and Machine Science, P. Flores, F. Viadero (Editores), Springer, pp. 807-815, 2015. (DOI 10.1007/978-3-319-09411-3_85)
14. Costa, C., Peixinho, N., Silva, J.P., Carvalho, S., Study and characterization of the crest module design: A 3D finite element analysis, (2015) Journal of Prosthetic Dentistry, 113 (6), pp. 541-547. DOI: 10.1016/j.prosdent.2014.12.008
15. Álvaro CUNHA, Jorge MARTINS, Nuno RODRIGUES and F. P. BRITO; "Vanadium Redox Flow Batteries: a Technology Review", Int. J. Energy Res. 2015; 39:889–918, 2015; DOI: 10.1002/er.3260; http://onlinelibrary.wiley.com/doi/10.1002/er.3260/full
16. M. Dourado, J. Meireles, Obtaining a Simplified Finite Element Model for Riveted Lap Joints in Structural Dynamics Analysis using a Updating Tool, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 2015, DOI 10.1016/j.rimni.2015.04.002.
17. B.D. Fernandes, A. Mota, J.A. Teixeira, A.A. Vicente; Continuous cultivations of photosynthetic microorganisms: Approaches, applications and future trends; Biotechnology Advances. 2015. Vol. 33(6/Part 2):1228–1245
18. Fernando AL, Duarte MP, Vatsanidou A, Alexopoulou E (2015) Environmental aspects of fiber crops cultivation and use. Industrial Crops and Products, 68, pp 105–115; doi:10.1016/j.indcrop.2014.10.003
19. Fernando AL , Boléo S, Barbosa B, Costa J, Duarte MP, Monti A (2015) Perennial Grass Production Opportunities on Marginal Mediterranean Land. BioEnergy Research, 8(4), pp 1523-1537. (doi: 10.1007/s12155-015-9692-0).
20. Ferreira F., Carvalho V., Soares F., Machado J., Pereira F (2015);. Development of a Vital Signs Monitoring System Using Radio Frequency Communication. Sensors & Transducers, Vol. 185, Issue 2, February 2015, pp. 93-99 (ISSN: 2306-8515, e-ISSN 1726-5479) (fator de impacto: 0.705) (H Index: 5; SJR: 0,204)
21. C. Gonçalves, H. Leitão, J. C. Teixeira, L. Ribas, S. Teixeira, M. F. Cerqueira, F. Macedo, D. Soares (2015) Wetting behaviour of SAC305 solder on different substrates in high vacuum and inert atmospheres, Journal of Materials Science: Materials in Electronics, DOI: http://link.springer.com/article/10.1007/s10854-015-3037-9
22. Gonçalves, N.; Carvalho, V.; Soares, F.; Vasconcelos, R.; Belsley, M.; Machado, J. (2015) Yarn Features Extraction Using Computer Vision – A Study with Cotton and Polyester Yarns, Measurement 68 (2015) 1–15 (fator de impacto ISI: 1.526) (H Index: 37; SJR: 0,620)
23. Jankauskienė Z, Butkutė B, Gruzdevienė E, Cesevičienė J, Fernando AL (2015) Chemical composition and physical properties of dew- and water-retted hemp fibers, Industrial Crops and Products, 75, part B, 206–211, Special Issue on the occasion of: Advances in Industrial Crops and Products Worldwide: AAIC 2014 international conference, available on line (doi:10.1016/j.indcrop.2015.06.044).
24. Kunz, G.; Machado, J.; Perondi E. (2015) Using timed automata for modeling, simulating and verifying networked systems controller’s specifications Neural Comput & Applic (In Press) DOI 10.1007/s00521-015-2115-5 (fator de impacto ISI: 1.569) (H Index: 34; SJR: 0,612)
25. Leitão A.L., Costa M.C., Enguita F.J. (2015) Unzippers, resolvers and sensors: a structural and functional biochemistry tale of RNA helicases. International Journal of Molecular Science, 2015; 16(2): 2269-2293; doi:10.3390/ijms16022269.
26. Lemos, D.; Amaral, N.; Machado, J.; Barros, C.; Leão, C.; Soares, F.; Minas, G.; Mechanical Simulation Model of the Systemic Circulation. Measurement 66 (2015) 212–221 (fator de impacto ISI: 1.526) (H Index: 37; SJR: 0,620)
27. Mota, A. Ferreira, A., Vicente, A.A., Sechet, P., Martins, J.M.F., Teixeira, J.A., Cartellier, Customization of an optical probe device and validation of a signal processing procedure to study gas-liquid-solid flows. Application to a three-phase internal-loop gas-lift Bioreactor A. Chemical Engineering Science. 2015. Vol. 138:(22): 814-826
28. Neves, Sara C; Pinho, Acm; Fonseca, Jaime C; Rodrigues, Nuno F; Henriques-Coelho, Tiago; Correia-Pinto, Jorge; Vilaca, Joao L , “Finite element analysis of pectus carinatum surgical correction via a minimally invasive approach”, Computer methods in biomechanics
29. Oliveira, R. F., Silva, M. V., Teixeira, S. F. C. F., Cabral-Marques, H. M., & Teixeira, J. C. F. (2015). Efficiency of valved holding chambers: experimental full dose assessment. Journal of Aerosol Medicine and Pulmonary Drug Delivery, 28(4), A2-A2.
30. Oliveira, R. F., Silva, M. V., Teixeira, S. F. C. F., Cabral-Marques, H. M., & Teixeira, J. C. F. (2015). Abstracts: Drug Delivery to the Lungs 25 Abstracts. Journal of Aerosol Medicine and Pulmonary Drug Delivery, 28(4), A2-A2.
31. Pascoal A, Quirantes-Piné R, Fernando AL, Alexopoulou E, Segura-Carretero A (2015), Phenolic composition and antioxidant activity of kenaf leaves, Industrial Crops and Products, 78, 116–123. available on line (doi:10.1016/j.indcrop.2015.10.028)
32. Pastrana-Martínez, L.M., Pereira, N., Lima, R., Gomes, H.T., Silva, A.M.T. “Degradation of diphenhydramine by photo-Fenton using magnetically recoverable iron oxide nanoparticles as catalyst”, Chemical Engineering Journal, 261, 45-52, 2015.
33. Pinto, P., Peixinho, N., Soares, D., Silva, F., Process development for manufacturing of cellular structures with controlled geometry and properties, (2015) Materials Research, 18 (2), pp. 274-282. DOI: 10.1590/1516-1439.286614
34. Pinto, E.; Faustino, V.; Rodrigues, R.O.; Pinho, D.; Garcia, V.; Miranda, J.M.; Lima, R. A Rapid and Low-Cost Nonlithographic Method to Fabricate Biomedical Microdevices for Blood Flow Analysis. Micromachines, 6, 121-135, 2015.
35. Rafsanjani, S.H., Lourenço, P.B., Peixinho, N.,Implementation and validation of a strain rate dependent anisotropic continuum model for masonry,(2015) International Journal of Mechanical Sciences, 104, pp. 24-43. DOI: 10.1016/j.ijmecsci.2015.10.001
36. Rafsanjani, S.H., Lourenço, P.B., Peixinho, N., Dynamic interface model for masonry walls subjected to high strain rate out-of-plane loads (2015), International Journal of Impact Engineering, 76, pp. 28-37. DOI: 10.1016/j.ijimpeng.2014.09.002
37. RO Rodrigues, D Pinho, V Faustino, R Lima, A simple microfluidic device for the deformability assessment of blood cells in a continuous flow, Biomedical Microdevices, 17 (6), 1-9, 2015
38. RO Rodrigues, R Lima, HT Gomes, AMT Silva, "Polymer microfluidic devices: an overview of fabrication methods", U. Porto Journal of Engineering 1 (1), 67-79, 2015.
39. RO Rodrigues, H Costa, R Lima, JS Amaral, "Simple Methodology for the Quantitative Analysis of Fatty Acids in Human Red Blood Cells", Chromatographia 78 (19-20), 1271-1281, 2015
40. Salman, O., Bezerra, K., Machado, J., Carvalho, V., Soares, F. (2015) Bed design with mechatronic system to decrease pressure ulcers. Romanian Review Precision Mechanics, Optics and Mechatronics 2015 (48), pp. 18-84. (H Index: 2; SJR: 0,102)
41. Santos, D., Machado, J., Varela, M.L. (2015). Automatic brake system for manual wheelchairs. Romanian Review Precision Mechanics, Optics and Mechatronics 2015 (48), pp. 98-102. (H Index: 2; SJR: 0,102)
42. Schmidt T, Fernando AL, Monti A, Rettenmaier N (2015) Life Cycle Assessment of Bioenergy and Bio-Based Products from Perennial Grasses Cultivated on Marginal Land in the Mediterranean Region, BioEnergy Research, 8, 1548-1561,available on line (DOI: 10.1007/s12155-015-9691-1)
43. C. Serralheiro, D. Duflot, F. Ferreira da Silva, S. V. Hoffmann, N. C. Jones, N. J. Mason, B. Mendes and P. Limão-Vieira (2015) Toluene Valence and Rydberg Excitations as Studied by ab initio Calculations and Vacuum Ultraviolet (VUV) Synchrotron Radiation, The Journal of Physical Chemistry A, 119: 9059-9069, doi: 10.1021/acs.jpca.5b05080
44. P. Silva, P. Fernandes, J. Sena-Cruz, J. Xavier, F. Castro, D. Soares, V.H. Carneiro - Effects of different environmental conditions on the mechanical characteristics of a structural epoxy, Composites Part B, Novembro 2015
45. H. M. Silva, J. F. Meireles, Feasibility of Internally Reinforced Thin-Walled Beams for Industrial Applications, Applied Mechanics and Materials, Vol. 775, pp. 119-124, 2015
46. Singhal J., Pinho D., Lopes R., Sousa P. C., Garcia V., Schütte H., R Lima, Gassmann S, “Blood Flow Visualization and Measurements in Microfluidic Devices Fabricated by a Micromilling Technique”, Micro and Nanosystems 7 (3), 148-153, 2015.
47. Soares C, Fernando AL, Mendes B, Martins APL (2015) The effect of lowering salt on the physicochemical, microbiological and sensory properties of São João cheese of Pico Island, International Journal of Dairy Technology, Volume 68, Issue 3, pages 409–419, available on line (DOI: 10.1111/1471-0307.12198)
48. A.A. Solghar, F. P. Brito, M. Abdolzadeh, A. Farajpour; Numerical study of twin groove journal bearings performance under steady state condition, Lubrication Science 2015; 27(2), pp. 83–102, Wiley, DOI: 10.1002/ls.1257; http://onlinelibrary.wiley.com/doi/10.1002/ls.1257/abstract
49. Vieira, G.G., Viveiros, A., Varela, M.L.R., Machado, J. (2015) Sustainable practices for electrical energy network management: A literature review and proposal. Romanian Review Precision Mechanics, Optics and Mechatronics 2015 (48), pp. 161-170 (H Index: 2; SJR: 0,102)
50. Vieira, G.G., Varela, M.L.R., Putnik, G.D., Machado, J. (2015). An integrated framework for supporting fuzzy decision-making in networked manufacturing environments. Romanian Review Precision Mechanics, Optics and Mechatronics 2015 (48), pp. 85-91 (H Index: 2; SJR: 0,102)
1. Araújo, N. Peixinho, A. C. Marques Pinho, J. C. P. Claro (2014), A Novel Methodology to Assess the Relaxation Rate of the Intervertebral Disc by Increments on Intradiscal Pressure, Applied Mechanics and Materials, Vol 664, pp 379-383; http://dx.doi.org/10.4028/www.scientific.net/AMM.664.379
2. Álvaro CUNHA, Jorge MARTINS, Nuno RODRIGUES and F. P. BRITO (2014), Vanadium Redox Flow Batteries: a Technology Review, (published online before print: 29 OCT 2014); http://dx.doi.org/10.1002/er.3260
3. Alves, J., Peixinho, N., Silva, M.T., Flores, P., Lankarani, H. (2014), A comparative study on the viscoelastic constitutive laws for frictionless contact interfaces in multibody dynamics, Mechanism and Machine Theory, Vol. 85, pp. 172-188, 2015
4. Bruno Henriques, Delfim Soares, José Carlos Teixeira, Filipe Silva (2014), Effect of hot pressing variables on the microstructure and hardness of sterling silver (Ag-Cu alloy) powder compacts, Materials Research, Vol 17(3), pp 664-671; WOS: 000338017600018; http://dx.doi.org/10.1590/S1516-14392014005000022
5. Bruno Silva; Machado, J. Mendes; Carvalho, Vítor; Soares, F.O.; Demétrio Matos; Filipe Pereira; Karolina Bezerra (2014), Conceptual design of a conveyer system for supporting basic quality of life of bedridden elderly people, The Romanian Review Precision Mechanics, Optics & Mechatronics, pp 164-169
6. Dourado, M., Soares, D., Barbosa, J., Marques Pinho, A., Meireles, J., Branco, P., Ribeiro, C., Rei, C. (2014), A comparative study of fatigue behaviour of MAG and laser welded components using reliability analysis, Materials Science and Engineering - A, Vol 606, pp 31-39; WOS: 000337775800004; http://dx.doi.org/10.1016/j.msea.2014.03.067
7. Ferreira, A. C.; Nunes, M. L.; Martins, L. B.; Teixeira, S. F. (2014), Thermal Analysis and Cost Estimation of Stirling Cycle Engine, WSEAS TRANSACTIONS ON POWER SYSTEMS, Vol 9, Art #51, pp 495-506; http://wseas.org/wseas/cms.action?id=7665
8. Ferreira, A.C.; Nunes, M.L.; Teixeira, SFCF; Martins, L.B. (2014), Technical-economic evaluation of a cogeneration technology considering carbon emission savings, International journal of Sustainable Energy Planning and Management, Vol 02, pp 33–45; http://dx.doi.org/10.5278/ijsepm.2014.2.4
9. Ferreira, Ana C.M.; Nunes, M.L.; Teixeira, S.F.C.F.; Martins, Luís Barreiros (2014), Technical-economic evaluation of a cogeneration unit considering carbon emission savings, International Journal of Sustainable Energy Planning and Management, Vol 2; http://dx.doi.org/10.5278/ijsepm.2014.2.4
10. M. Machado, N. Peixinho (2014), Numerical Simulation of Compressive Response of Open-Cell Aluminum Foams, Advanced Materials Research, Vol 1016, pp 156-160; http://dx.doi.org/10.4028/www.scientific.net/AMR.1016.156
11. Machado, M., Flores, P., Ambrósio, J (2014), A lookup table-based approach for spatial analysis of contact problems, ASME Journal of Computational and Nonlinear Dynamics, Vol 9(4), 041010-10; WOS: 000340774200011; http://dx.doi.org/10.1115/1.4026894
12. N. Peixinho, J.Tavares, J. Meireles (2014), Study of a W-beam Guardrail Behaviour in Road Safety Barriers, Advanced Materials Research, Vol 1016, pp 54-58; http://dx.doi.org/10.4028/www.scientific.net/AMR.1016.54
13. N. Peixinho, P. Pinto, F. Silva, D. Soares (2014), Quasi-static Compressive Properties of Aluminium Foams with Functionally Graded Properties, Advanced Materials Research, Vol 1016, pp 115-118; http://dx.doi.org/10.4028/www.scientific.net/AMR.1016.115
14. P. Correia, N. Peixinho (2014), Static and Dynamic Tensile Behavior of Unidirectional Glass/Epoxy Composites, Advanced Materials Research, Vol 1016, pp 298-301; http://dx.doi.org/10.4028/www.scientific.net/AMR.1016.298
15. P. Pinto, N. Peixinho, F. Silva, D. Soares (2014), Compressive properties and energy absorption of aluminium foams with modified cellular geometry, Journal of Materials Processing Technology, Vol 214(3), pp 571-577; WOS: 000330160000009; http://dx.doi.org/10.1016/j.jmatprotec.2013.11.011
16. Peixinho, N., Pinto, P., Silva, F., Soares, D. (2014), Quasi-static compressive properties of aluminium foams with functionally graded properties, Advanced Materials Research, 1016, pp 115-118; http://dx.doi.org/10.4028/www.scientific.net/AMR.1016.115
17. Puga, H.; Barbosa, J.; Teixeira, J.C. and Prokic, M. (2014), A New Approach to Ultrasonic Degassing to Improve the Mechanical Properties of Aluminum Alloys, Journal of Materials Engineering and Performance, Vol 23(10), pp 3736-3744; WOS: 000342223200038; http://dx.doi.org/10.1007/s11665-014-1133-2
18. Rafsanjani, S.H.; Lourenço, P.B.; Peixinho, N. (2014), Dynamic interface model for masonry walls subjected to high strain rate out-of-plane loads, International Journal of Impact Engineering, Vol 76, pp 28-37; http://dx.doi.org/10.1016/j.ijimpeng.2014.09.002
19. Vânia Moreira; Machado, J. Mendes; Carvalho, Vítor; Soares, F.O.; Ana Ferraz (2014), Mechatronic System for ABO Human Blood Typing, Journal of Medical Devices, Vol 8(4), pp 1-7; http://dx.doi.org/10.1115/1.4028201
20. Vasconcelos, Rosa; Carneiro, António; Lima, Mário; Silva F., Luís; Seabra, Eurico (2014), Handle Assessment of Tissue Paper, Journal of Textile Engineering, Vol 59 (6), pp 169-175; http://dx.doi.org/10.4188/jte.59.169
21. Couto, M.; Santos, C.; Machado, J. (2014) Modelling and Design of a Tridimensional Compliant Leg for Bioloid Quadruped, Applied Mathematics & Information Sciences, vol. 8, pp. 1501-1507, Jul 2014. WOS:000332452400003 (fator de impacto ISI: 1.232) (H Index: 12; SJR: 0,429)
22. Kovář R., Machado J., Ševčík L. (2014), Improving Production of Inorganic Nanofibers Using Advanced Simulation Techniques, The Romanian Review Precision Mechanics, Optics & Mechatronics, 2014, No. 45, pp. 159-163 (H Index: 2; SJR: 0,197)
23. Brito, F. P., Fillon, M., Miranda, A.S., Costa, L., Claro, J.C.P., Teixeira, J.C., Thermohydrodynamic Modelling of Journal Bearings under Varying Load Angle and Negative Groove Flow Rate, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 2014 228 (9) 955-973, http://pij.sagepub.com/content/228/9/955 (Special Issue on Sliding Contact Bearings), DOI: 10.1177/1350650114526388
24. Solghar, A.A., Brito, F.P., Pimenta Claro, J.C., An experimental investigation on the influence of deactivation of a groove on the performance of a twin groove journal bearing, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, Sage, 228(5): 2014 548-557, DOI: 10.1177/1350650113518521, http://pij.sagepub.com/content/228/5/548
25. Sérgio L. Costa; Nuno Peixinho; João P. Mendonça; (2014) Numerical Simulation of Impact Events of the Ultimate Metallic Toe Cap Model for Safety Footwear, Proc. ASME 46445; Volume 2B: Advanced Manufacturing, San Diego, CA November 14, 2014 IMECE2014-39360, doi: 10.1115/IMECE2014-39360
26. Pereira Pedro, Enguita Francisco Javier, Ferreira João, Leitão Ana Lúcia (2014) DNA damage induced by hydroquinone can be prevented by fungal detoxification, Toxicology Reports, 1: 1096-1105, doi: 10.1016/j.toxrep.2014.10.024
27. Leitão Ana Lúcia, Enguita Francisco Javier (2014) Fungal extrolites as a new source for therapeutic compounds and as building blocks for applications in synthetic biology, Microbiological Research, 169 (9-10): 652-665, doi: 10.1016/j.micres.2014.02.007
28. Lidon F., Almeida AS., Leitão AL., Silva MM., Pinheiro N., Maçãs B., Costa R. (2014) A synoptic overview of durum wheat production in the Mediterranean region and processing following the European Union requirements, Emirates Journal of Food and Agriculture, 26 (8): 693-705, doi: 10.9755/ejfa.v26i8.17066
29. Leitão Ana Lúcia, Enguita Francisco Javier (2014) The art of unwinding: RNA helicases at the crossroads of cell biology and human disease, Journal of Biochemical and Pharmacological Research, 2 (3): 144-158
30. http://researchpub.org/journal/jbpr/number/vol2-no3/vol2-no3-3.pdf
31. Fernando AL, Duarte MP, Vatsanidou A, Alexopoulou E (2014) Environmental aspects of fiber crops cultivation and use, Industrial Crops and Products, doi: 10.1016/j.indcrop.2014.10.003
32. Barbosa B, Costa J, Fernando AL, Papazoglou EG (2014) Wastewater reuse for fiber crops cultivation as a strategy to mitigate desertification, Industrial Crops and Products, doi: 10.1016/j.indcrop.2014.07.007
33. Filomena Pinto, FT. Varela, M. Gonçalves, R. Neto André, P. Costa, B. Mendes (2014) Production of bio-hydrocarbons by hydrotreating of pomace oil, Fuel (0016-2361), 116: 84-93, (13/08/2013 on line), doi:10.1016/j.fuel.2013.07.116
34. R. Moita, J. Ortigueira, A. Freches, J. Pelica, M. Gonçalves, B. Mendes, PC. Lemos (2014) Bio-oil upgrading strategies to improve pha production from selected aerobic mixed cultures, New Biotechnology, 31 (4): 297-307 (01/11/2013-on line) doi:10.1016/j.nbt.2013.10.009
35. R. Barbosa, N. Lapa, H. Lopes, A. Günther, D. Dias, B. Mendes (2014) Biomass fly ashes as low-cost chemical agents for Pb removal from synthetic and industrial wastewaters, Journal of Colloid and Interface Science, 424: 27–36 http://dx.doi.org/10.1016/j.jcis.2014.03.013
36. M. Bernardo, S. Mendes, N. Lapa, M. Gonçalves, B. Mendes, F. Pinto, H. Lopes (2014) Leaching behaviour and ecotoxicity evaluation of chars from the pyrolysis of forestry biomass and polymeric materials, Ecotoxicology and Environmental Safety, 107: 9–15, http://dx.doi.org/10.1016/j.ecoenv.2014.05.007
1. Bernardo M, Mendes S, Lapa N, Gonçalves M, Mendes B, Pinto F, Lopes H, Fonseca I (2013) Removal of lead (Pb2+) from aqueous medium by using chars from co-pyrolysis, Journal Of Colloid And Interface Science, 409: 158-165, doi: 10.1016/j.jcis.2013.07.050
2. Maurício Elisabete, Rosado Catarina, Duarte Maria Paula, Lanza Ana Maria Díaz (2013) Application of Óbidos “Ginginha” by-products in topical formulations: A preliminary study, Biomedical and Biopharmaceutical Research, 10 (1): 83-90
3. http://www.biomedicalandbiopharmaceuticalresearch.com/images/Article8_10n1.pdf
4. Barbosa R, Lapa N, Dias D, Mendes B (2013) Concretes containing biomass ashes: mechanical, chemical and ecotoxic performances, Construction and Building Materials, 48: 457-463, doi: 10.1016/j.conbuildmat.2013.07.031
5. Barbosa R, Lapa N, Lopes H, Morujo A, Mendes B (2013) Removal of phosphorus from wastewaters by biomass ashes, Water Science And Technology, 68 (9): 2019-2027, doi:10.2166/wst.2013.455
6. Enguita FJ, Leitão AL (2013) Hydroquinone: environmental pollution, toxicity, and microbial answers, Biomed Research International, Vol. 2013, article ID 542168, 14 pages, http://dx.doi.org/10.1155/2013/542168
7. Barbosa R, Dias D, Lapa N, Lopes H, Mendes B (2013) Chemical and ecotoxicological properties of size fractionated biomass ashes, Fuel Processing Technology, 109: 124-132, doi: 10.1016/j.fuproc.2012.09.048
8. Alves A, Ramos A, Gonçalves MM, Bernardo M, Mendes B. (2013) Antioxidant activity, quality parameters and mineral content of Portuguese monofloral honeys, Journal of Food Composition and Analysis, 30 (2): 130-138, doi: 10.1016/j.jfca.2013.02.009
9. Santos S., Lapa N., Alves A., Morais J., Mendes B. (2013) Analytical methods and validation for determining trace elements in red wines, Journal of Environmental Science and Health, Part B, 48 (5): 364-375, doi: 10.1080/03601234.2013.742374
10. Pinto F, Martins S, Gonçalves M, Costa P, Gulyurtlu I, Alves A, Mendes B (2013) Hydrogenation of Rapeseed oil for production of liquid bio-chemicals, Applied Energy, 102: 272-282, doi: 10.1016/j.apenergy.2012.04.008
11. Reboredo F., Lidon F., Pessoa F., Duarte MP., Silva M. (2013) The uptake of macronutrients by an active silicon accumulator plant growing in two different substrata, Emirates Journal of Food and Agriculture, 25 (12): 986-993, doi: 10.9755/ejfa.v25i12.16735
12. Gonçalves MM., Santos E., Duarte I., Marques D., Mendes B. (2013) Composition and functional properties of essential oils extracted from forest waste biomass. Studia (issue IV Seminário Luso-Brasileiro em Ciências do Ambiente e Empresariais) 4pp, http://revista.inuafstudia.pt/uploads/news/id170
13. Fonseca A., Gonçalves MM., Mendes B. (2013) Pyrolysis of waste palm oil and waste sunflower oil to produce bio-oils and biofuels, Studia (issue IV Seminário Luso-Brasileiro em Ciências do Ambiente e Empresariais), 4pp http://revista.inuafstudia.pt/uploads/news/id162
14. Sapatinha M, Gonçalves MM, Fonseca A, Lemos P, Mendes B. (2013) Thermochemical conversion of high acidity olive oils and olive pomace in bioliquids and biochars, Studia (issue IV Seminário Luso-Brasileiro em Ciências do Ambiente e Empresariais), 4pp
15. http://revista.inuafstudia.pt/index.php?mact=News,cntnt01,detail,0&cntnt01articleid=160&cntnt01origid=62&cntnt01detailtemplate=newsDetail&cntnt01category_id=20&cnt
16. Barros, C; Leão, CP; Soares, FO; Minas, G; Machado, J (2013), RePhyS: A multidisciplinary experience in remote physiological systems laboratory, International Journal of Online Engineering (iJOE), Vol 9, pp 21-24; http://dx.doi.org/10.3991/ijoe.v9iS5.2756
17. Brito, FP; Claro, JCP; Miranda, AS; Teixeira, JCF; Costa, L; Fillon, M (2013), The role of lubricant feeding conditions on the performance improvement and friction reduction of journal bearings, Tribology International, Vol 72, pp 65–82; http://dx.doi.org/10.1016/j.triboint.2013.11.016
18. Brito, FP; Goncalves, LM; Martins, J (2013), Influence of heat pipe operating temperature on exhaust heat thermoelectric generation, SAE International Journal of Passenger Cars - Mechanical Systems, Vol 6 (2), pp 652-664; http://dx.doi.org/10.4271/2013-01-0559
19. Campos, JC; Machado, J (2013), A Specification Patterns System for Discrete Event Systems' Analysis, International Journal of Advanced Robotic Systems, Vol 10, 315; http://dx.doi.org/10.5772/56412
20. Carvalho, J; Ribeiro, A; Araújo, J; Castro, F (2013), Technical aspects of adsorption process onto an innovative eggshell-derived low-cost adsorbent , Materials Science Forum, Vol 730-732, pp 648-652; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.648
21. Castro, F; Vilarinho, C; Soares, D; Castro, AM; Carneiro, C; Sousa, C; Maçães, C (2013), Kinetic study of thermal de-chlorination of PVC-containing waste, Materials Science Forum, Vol 730-732, pp 611-616; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.611
22. Costa, JPM; Teixeira, JCF; Silva, LF; Teixeira, SFCF (2013), Experimental analysis of particles flow inside the Volumatic® spacer, WIT Transactions on Biomedicine and Health, Vol 17, pp 25-37; http://dx.doi.org/10.2495/BIO130031
23. Costa, R; Neto, AI; Calgeris, I; Correia, CR; Pinho, ACM; Fonseca, JC; Öner, ET; Mano, JF (2013), Adhesive nanostructured multilayer films using a bacterial exopolysaccharide for biomedical applications, Journal of Materials Chemistry B, Vol 1 (18), pp 2367-2374; http://dx.doi.org/10.1039/c3tb20137f
24. Devesa-Rey, R; Fonseca, B; Rubinos, D; Tavares, T (2013), Effect of phosphorus on the attenuation of lead and chromium transport in soils, Environmental Earth Sciences, Vol 70 (6), pp 2443-2451; http://dx.doi.org/10.1007/s12665-013-2287-1
25. Ferreira, ACM; Nunes, ML; Teixeira, SFCF; Martins, L (2013), Technical-economic evaluation of a cogeneration technology considering carbon emission savings, International Journal of Sustainable Energy Planning and Management, (Accepted); http://www.ct2m.uminho.pt/pub/367.pdf
26. Ferreira, J; Moreira, V; Lima, CS; Soares, FO; Leão, CP; Machado, J (2013), Development, Test and Validation of a Mechatronic Device for Spasticity Quantification, International Journal of Advanced Robotic Systems, Vol 10, Article Number: 259; http://dx.doi.org/10.5772/56334
27. Ferreira, PT; Ferreira, MEC; Teixeira, JCF (2013), Analysis of Industrial Waste in Wood Pellets and Co-combustion Products, Waste and Biomass Valorization, Vol 4, 4, Springer; http://dx.doi.org/10.1007/s12649-013-9271-6
28. Gonçalves, R; Sarraipa, J; Agostinho, C; Grilo, A; Mendonça, JP (2013), Reference framework for enhanced interoperable collaborative networks in modern furniture industrial organizations, International Journal of Computer Integrated Manufacturing, Vol 26 (1), SI, pp 166-182; http://dx.doi.org/10.1080/0951192X.2012.687130
29. Henriques, B; Pinto, P; Sousa, J; Teixeira, JCF; Soares, D; Silva, FS (2013), On the hot pressing of coloured high-gold alloys powder compacts applied to the manufacturing of innovative jewellery items, Gold Bulletin, Vol 46 (2), pp 117-125; http://dx.doi.org/10.1007/s13404-013-0089-6
30. Lobo, E; Fertuzinhos, J; Mendonça, JP; Machado, J (2013), Obtaining Plant Models for Formal Verification Tasks from 3D CAD Models: Which is the Best Approach?, Advanced Materials Research, Vol 630, pp 283-290; http://dx.doi.org/10.4028/www.scientific.net/AMR.630.283
31. Martins, J; Torres, F; Torres, E (2013), The use of biodiesel on the performance and emissions of diesel engined vehicles, SAE Technical Paper 2013-01-1698; http://dx.doi.org/10.4271/2013-01-1698
32. Peixinho, N; Noversa, M (2013), Numerical simulation of impact behavior of structures with response adapted to the intensity of shock, Materialwissenschaft und Werkstofftechnik, Vol 44 (10), pp 856-860; http://dx.doi.org/10.1002/mawe.201300053
33. Pereira, F; Carvalho, V; Soares, FO; Machado, J; Bezerra, K; Silva, R; Matos, D (2013), Development of a mechatronic system for bedridden people support, Romanian Review Precision Mechanics, Optics and Mecatronics, Vol 43, pp 138-144; http://www.ct2m.uminho.pt/pub/426.pdf
34. Ribeiro, A; Carvalho, J; Castro, J; Araújo, J; Vilarinho, C; Castro, F (2013), Alternative feedstocks for biodiesel production, Materials Science Forum, Vol 730-732, pp 623-629; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.623
35. Rodrigues, PL; Direito-Santos, B; Moreira, AHJ; Fonseca, JC; Pinho, ACM; Rodrigues, NF; Henriques-Coelho, T; Correia-Pinto, J; Vilaça, JL (2013), Variations of the soft tissue thicknesses external to the ribs in Pectus Excavatum patients., European Journal of Pediatric Surgery, Vol 48 (9), pp 1878-1886; http://dx.doi.org/10.1016/j.jpedsurg.2013.01.047
36. Seabra, E; Puga, H; Silva, LF (2013), A novel approach for the CAM-Follower mechanism of high frequency cutting file machine, Applied Mechanics and Materials, Vol 333-335, pp 2085-2088; http://dx.doi.org/10.4028/www.scientific.net/AMM.333-335.2085
37. Sena-Cruz, J; Ferreira, RM; Ramos, LF; Fernandes, FM; Miranda, F; Castro, F (2013), Luiz Bandeira bridge: assessment of a historical rc bridge, International Journal of Architectural Heritage, Vol 7 (6), pp 628-652; http://dx.doi.org/10.1080/15583058.2012.654895
38. Silva, H; Peixinho, N; Silva, FS (2013), Numerical Study on the Sensitivity Analysis for Strength and Stiffness of Regular Cellular Solids, International Journal of Applied Research in Mechanical Engineering, Vol 3(1), pp 93-98; http://hdl.handle.net/1822/25295
39. Silva, HM; Meireles, JF (2013), Determination of material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion, Materials Science Forum, Vol 730-732, pp 507-512; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.507
40. Sousa, C; Castro, F; Vilarinho, C; Soares, D (2013), Evaluation of the energetic valorization potential of the polymeric and textile industrial wastes, Materials Science Forum, Vol 730-732, pp 592-597; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.592
41. Vieira, DJ; Meireles, JF; Nunes, JP (2013), Improving the Dynamical Behaviour of a Laser Cutting Equipment by Using a Carbon Fibre Composite Main Structural Runway Frame, Materials Science Forum, Vol 730-732, pp 349-354; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.349
42. Vilarinho, C; Castro, A; Carneiro, C; Maçães, C; Sousa, C; Soares, D; Castro, F (2013), Study of a two steps process for the valorization of PVC-containing wastes, Waste and Biomass Valorization, Vol 4 (1), pp 55-63; http://dx.doi.org/10.1007/s12649-012-9175-x
43. Vilarinho, C; Castro, F; Carneiro, F; Ribeiro, A (2013), Development of a process for copper recovering from galvanic sludges , Materials Science Forum, Vol 730-732, pp 575-580; http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.575
44. Joel V. Silva; Sérgio L. Costa; Hélder Puga; Nuno Peixinho; João P. Mendonça; (2013) Sustainable Reverse Engineering Methodology Assisting 3D Modeling of Footwear Safety Metallic Components, Proc. ASME 56185; Volume 2A: Advanced Manufacturing, San Diego, CA November 15, 2013 IMECE2013-65190, doi: 10.1115/IMECE2013-65190
45. Sérgio L. Costa; Joel V. Silva; Nuno Peixinho; João P. Mendonça; (2013) Innovative Geometric Redesign of Safety Footwear Components Using a Reverse Engineering Approach, Proc. ASME 56185; Volume 2A: Advanced Manufacturing, San Diego, CA November 15, 2013 IMECE2013-65226, doi: 10.1115/IMECE2013-65226
46. Joao Sarraipa; Pedro Gomes-de-Oliveira; Catarina Marques-Lucena; Ricardo Jardim-Goncalves; João Mendonça da Silva; (2013) E-Training Development Approach for Enterprise Knowledge Evolution, Proc. ASME 56277; Volume 5: Education and Globalization, San Diego, CA November 15, 2013 IMECE2013-65118, doi: 10.1115/IMECE2013-65118
47. Sérgio L. Costa; Joel V. Silva; Nuno Peixinho; João P. Mendonça; (2013) Advanced Metallic Solution for Toe Cap Component, Proc. ASME 56406; Volume 11: Emerging Technologies, San Diego, CA November 15, 2013 IMECE2013-65221, doi: 10.1115/IMECE2013-65221